EN
Türkçe
Double Scissor Lift Table Interlocked Doors 4000 kg
Double Scissor Lift Table Interlocked Doors 4000 kg
Double Scissor Lift Table for Factory Production Areas
Wide Material Carrying Between Floors with Controlled Access and Smooth Flow
In factory production environments, material transfer between floors is often where throughput is won or lost. When loads are long, wide, or frequent, standard handling methods can create bottlenecks, increase maneuvering time, and introduce avoidable safety risk.
Onder Lift’s Double Scissor Lift Table is designed for wide material carrying between floors in production areas where stability, predictable movement, and controlled access are essential. With a long platform footprint and interlocked floor doors, it supports a more disciplined and efficient internal logistics routine.
Project Configuration at a Glance
- Type: Double Scissor Lift Table
- Application: Factory production area – wide materials carrying between floors
- Lifting capacity: 4000 kg
- Platform dimensions: 6500 × 1500 mm
- Stroke (travel): 6320 mm
- Motor power: 7.5 kW
- Access protection: 3 interlocked sliding floor doors
- Material flow: 90° entry/exit
Why Double Scissor? Stability and Control at Higher Travel
A double scissor design is typically selected when the project requires higher travel with stable lifting geometry. In real production operations, this translates into:
- More confident handling for heavy, long loads
- Better controlled platform behavior across the travel range
- A foundation for consistent, repeatable lift cycles in daily use
Combined with the 6320 mm travel, this setup is aimed at facilities that need reliable between-floor movement without improvisation.
Long Platform Advantage: 6500×1500 mm for Wide Materials
The 6500 × 1500 mm platform is a defining feature of this configuration. A long platform supports:
- Transport of elongated materials or multiple units per cycle
- More practical positioning for carts, pallets, or custom carriers
- Reduced re-handling steps, improving total transfer time
In production areas, fewer handling steps usually means fewer delays—and fewer opportunities for errors.
4000 kg Capacity for Industrial Reality
A 4000 kg capacity is built for real-world production loads where weight is not always evenly distributed and where cycle frequency can be high. In many factories, “load” includes not only the product, but also carriers, fixtures, and handling frames—capacity headroom matters.
Interlocked Sliding Floor Doors: Controlled Access Where It Counts
This system includes 3 interlocked sliding floor doors, supporting a structured access concept:
- Doors remain controlled based on platform position
- Entry/exit can be managed more safely at each level
- The work area stays cleaner and more disciplined—especially in high-traffic zones
For decision makers, interlocking is often a key requirement because it standardizes safe use across shifts and operators.
90° Entry/Exit: Designed Around Your Material Flow
The 90-degree entry/exit layout is a practical advantage in production environments where routes are constrained or where a right-angle workflow is necessary to match conveyor lines, aisles, or staging zones.
In practice, 90° flow can help:
- Reduce turning radius challenges
- Improve aisle discipline
- Keep transfer routes aligned with the production layout
Power and Performance: 7.5 kW Motor
A 7.5 kW motor supports the power demands of heavy lifting with repeatable cycles. In factory environments, consistency matters as much as peak performance—predictable operation helps protect throughput and planning.
Typical Use Cases in Production Facilities
This configuration is a strong fit for facilities that need:
- Between-floor movement of long or wide materials
- Controlled access at multiple levels
- Standardized handling cycles for improved efficiency
- Safer material transfer integrated into production flow
Key Questions to Finalize the Right Solution
- What are the maximum load weight and load length in real operation?
- Will loads arrive by pallet truck, cart, forklift, or custom carrier?
- Which floors require access (matching the 3-door layout)?
- Is 90° entry/exit fixed by layout, and what are the approach clearances?
- What daily cycle frequency is expected (peak shift demand)?
These inputs help define the final configuration and site integration details.
Summary: A Long-Platform, Heavy-Duty Lift Table Built for Production Flow
Onder Lift’s Double Scissor Lift Table—with 4000 kg capacity, a 6500×1500 mm platform, and 6320 mm travel—is designed for factory production areas that require wide material carrying between floors. With a 7.5 kW motor, 3 interlocked sliding floor doors, and 90° entry/exit, it supports controlled access and efficient internal logistics in a clean, disciplined workflow.
For project-specific configuration support and a quotation: www.onderlift.com
Fotoğraf Galerisi
Categories
-
Lift Tables
- Single Scissor Lift Table
- Double Scissor Lift Table
- High Scissor Lift Table
- Stainless Steel Scissor Lift Table
- Galvanized Lift Table
- Car Lift Table
- Disabled Lift
- Ball Screw Scissor Lift Table
- U / Low Profile Lift Tables
- Mobile Scissor Lift Table
- Loading Dock Table
- Tandem Type Scissor Lift
- Tilt Table
- Lift Tables Accessories
Usage Areas
Aerospace Agriculture Automotive Defense Industry Education Energy Entertainment Food & Pharmaceutical Heavy Equipment logistic Logistics Manlift Manufactoring Manufacturing Manufacturing metal working Metal Working Retail WoodworkingRecently Added
Pitless Hinged Dock Leveler 6,000 kg | 2000×2000 mm
Double Scissor Lift Table Interlocked Doors 4000 kg
Attended Goods Lift (Man-on-Board) 1500 kg
Driver On Board Car Platform 3000 kg
